ADEMCO DVR Uživatelská příručka stáhnout pdf (Strana 12)

Rev 1.00 6 Document 900.0399

09/05

Typical DVR Installation

Setting Unit for NTSC or PAL

Before turning on your DVR, set the switch (see Figure 2-1) to NTSC or PAL to match your

equipment. If your DVR is already powered, unplug the power cord from the wall outlet.

Wait a few seconds, set the switch (see Figure 2-1), and then re-apply power.

Note You cannot mix NTSC and PAL equipment. For example, do not connect

NTSC cameras when your DVR is set to PAL. Similarly, do not connect a

PAL camera and an NTSC monitor.

OUT1 234

Four Audio

Inputs

Audio Line

Output

Four Sensor

Inputs

LAN for Remote

Access Software

Connection

1 Internal Alarm

Output Relay

CCTV Monitor

VGA Monitor

Four Video Inputs for Cameras

RS-232 for

Engineering Use

To 12 VDC

Adapter

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 65 66

Žádné komentáře

ADEMCO DVR Uživatelská příručka Strana 12