ADEMCO VISTA-100 Uživatelský manuál stáhnout pdf

Ademco Vista-20P/First Alert FA-168C Basic Commands

Zones 64 total

Wireless Yes, Zones 09 to 48 + 16 Keyfob Zones (Zones 49 to 64)

Batteries 12 volt Rechargable inside main Panel, AC Transformer 16 volts

Door/Windows 3-Volt Lithium

Motion Sensor 2 3-Volt Lithium

Smoke Detector 2 9-volt Alkalines

Remote Keypads 3-Volt Lithium

Keyfobs 3-Volt Lithium

Remote Panics 9-Volt Lithium

Downloadable Yes

Partitions 2

Panic Buttons Police Panic - * and #

Fire Panic - 1 and *

Medical Panic - 3 and #

Status Press * if keypad shows NOT READY to view open zones

Arm Away 4-digit code + 2 (AWAY) to arm everything

Arm Stay 4-digit code + 3 (STAY) to arm all but motions

Instant Arm 4-digit code + 7 (INSTANT), this also bypasses motions

Max Arming 4-digit code + 4 (MAX) and everything arms instant

Quick-Arm # + 2 for AWAY, # + 3 for STAY

Disarm 4 digit code + 1 (OFF)

Silence Alarm 4-digit code + 1 (OFF) twice to turn off siren and reset display

(If code is entered wrong, wait 2 or 3 seconds then try again)

Bypass 4-digit code + 6 (BYPASS) + zone (01, 02 03 etc)

(keypad will beep, BYPASS + Zone should show, arm system)

Quick Bypass User Code + 6 + # (Bypasses all open Zones)

Alarm Memory See Event Buffer

Reset Smoke 4-digit code + 1 (OFF) twice to turn off siren and reset smoke

(If this does NOT reset smoke detector set for service, smoke is bad)

Door Chimes 4-digit code + 9 (CHIME)

GoTo Partition 1. User Code + *

2. Enter Partition 0 = Return to original Partition

1 = Partition 1

2 = Partition 2

3 = Common Lobby Partition

3. Keypad will return to original partition in 2 minutes or with User Code + * + 0

User MUST be assigned for multiple partition access in User Codes section

Voice Keypads

Voice Chime # + 0 + 2 + 4 to Enable or Disable (Keypad should say "ON" or "OFF")

Show Status # + 0 + *

Show Faults Press * *

Record 1. Press # + 0 + 1 (LED turns ON)

Message 2. Record message up to 2.5 minutes

3. Press 1 to end (LED begins FLASHING)

Play 1. Press # + 0 + 3

Message 2. Recorded message will play (LED turns OFF)

Adjust Volume Press # + 0 + 2 then press 3 or 6 to raise or lower volume

Phone Test 1. 4-Digit Code + 5 (TEST) + 1

2. Keypad will send test signal

If successful keypad will show "Phone Okay" or "Cd"

If unsuccessful keypad will show "Comm Failure" or "FC"

1 2 3 4 5 6

Shrnutí obsahu

Strany 1

Ademco Vista-20P/First Alert FA-168C Basic CommandsZones 64 totalWireless Yes, Zones 09 to 48 + 16 Keyfob Zones (Zones 49 to 64)Batteries 12 volt Rech

Strany 2

Test Sensors 4-Digit Code + 5 (TEST) + 0Keypad will beep every 40 secondsOpen sensors and keypad will soundEnd test with 4-digit Code + 1 (OFF) key(Wi

Strany 3

#7 + 01 to 18 = Start External Relay or X-10 Device#8 + 01 to 18 = Stop External Relay or X-10 DeviceUse Macros (Macro Key must be previously programm

Strany 4

Example: For a STOP time of 06:15 AM SaturdayEnter 06 15 then 0 for AM (1 if PM)Then press * until cursor is under S (Saturday) then 1 to select,

Strany 5

Ademco Vista-20P/First Alert FA-168C User CodesSystem Master Code User 02Partition 1 Master Code User 03 (Partitioning can be changed)Partition 2 Mast

Strany 6

Ademco Vista-20P/First Alert FA-168C Trouble DisplayFor Module Trouble System displays 1 + Address of ModuleAlpha Keypads Standard Keypads Description