ADEMCO Security System VISTA-15CN Uživatelský manuál stáhnout pdf (Strana 6)

– 6 –

EXPLANATION OF ZONE ASSIGNMENT TABLE HEADINGS

Zn = ZONE NO.

Zone Nos. are from 01 to 06, 09 to 35, 92, 95, 96, 99. Some are pre-assigned.

With Field

✱

25 set for auxiliary wired loops (4219, or 4229), use Zone Nos. 10–17 for loops A–H.

With Field

✱

22 set for RF (5800), use Zone Nos. 10-35.

ZT = ZONE

TYPE

00 = Not Used

01 = Entry/Exit #1

02 = Entry/Exit #2

03 = Perimeter

04 = Interior Follower

05 = Trouble Day/Alarm Night

06 = 24-Hr Silent

07 = 24-Hr Audible

08 = 24-Hr Aux

09 = Fire

10 = Interior w/Delay

12 = 24-Hour Monitor

20 = Arm–Stay

21 = Arm–Away

22 = Disarm

23 = No Alarm Response

24 = Silent Burglary

DEFAULT VALUES

Zn:

01 02 03 04

ZT:

[09] [01] [01] (03)

Zn:

05 06 99

ZT:

[03] [03] [07]

RC = ALARM REPORT CODE

Two Hex Digits. For each Hex Digit, enter: 00–09 for 0–9, 10 for A, 11 for B, 12 for C, 13 for

D, 14 for E, 15 for F. If 00 is entered as the first digit, there will be no report for that zone.

For contact ID reporting, this is an enabling code only. Enter any hex digit (other than 00) in

the first pair of boxes. The second pair of boxes are ignored.

In = LOOP

INPUT TYPE

HW: Hard Wire

AW: Aux Wire (4219 or 4229)

Enter 2 for AW: Auxiliary wired

Enter 3 for RF: Supervised RF

Enter 4 for UR: Unsupervised RF

Enter 5 for BR: Button Type RF

Hardwire zone input

types are automatically

assigned.

RT = RESPONSE TIME

0 = 10mSec; 1 = 350mSec; 2 = 700mSec. Default Values for zones 01 – 06 = 1 (350mSec)

L = LEARNED RF INPUT

Used with 5800 RF Loop Input Devices. Record transmitter input number.

SYSTEM STATUS REPORT CODES (

✱

59 –

✱

68)

†

TO PROGRAM SYSTEM STATUS & RESTORE

REPORT CODES (

✱

59–

✱

76, &

✱

89):

With a 3+1 or 4+1 Standard Format:

Enter a code in the

first

box: 1–9, 0, B, C, D, E, or F. Enter #+10 for 0, #+11 for B, #+12

for C, #+13 for D, #+14 for E, #+15 for F.

A 0 (

not

#+10) in the

first

box will disable a report.

A 0 (

not

#+10) in the

second

box will result in automatic

advance to the next field when programming.

With an Expanded or 4+2 Format:

Enter codes in

both

boxes

(1st and 2nd digits) for 1–9, 0, or B–F, as described above.

A 0 (

not

#+10) in the

second

box will eliminate the expanded

message for that report.

A 0 (

not

#+10) in

both

boxes will disable the report.

With Ademco Contact ID Reporting:

Enter any digit (other

than 0) in the

first

box, to enable zone to report (entries in the

second

boxes will be ignored).

A 0 (

not

#+10) in the

first

box will disable the report.

Examples:

For Code

(single digit), enter: 3 | 0

For Code

3 2

(two digits), enter: 3 | 2

For Code

B 2

(Hexadecimal), enter: #+11 | 2

✱

EXIT ERROR REPORT CODE [0]

✱

TROUBLE REPORT CODE

[00]

✱

BYPASS REPORT CODE

[00]

✱

AC LOSS REPORT CODE

[00]

✱

LOW BAT REPORT CODE

[00]

✱

TEST REPORT CODE

[00]

✱

OPEN REPORT CODE

[0]

†

✱

ARM AWAY/STAY RPT CODE

[00]

††

AWAY STAY

† 2nd digit is automatically sent as the 2nd digit of the

zone alarm report code programmed in

✱

56, if expanded

or 4+2 reporting is selected.

†† 2nd digit is automatically sent as the user number if

expanded or 4+2 reporting is selected.

✱

RF XMTR LOW BAT REPORT CODE [00]

✱

CANCEL REPORT CODE [00]

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Komentáře k této Příručce

Žádné komentáře

ADEMCO Security System VISTA-15CN Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu ADEMCO Security System VISTA-15CN