- 9 -
Field Function
Programmed Values[ ] = Table 1 Default Value
✱
90
EVENT LOGGING
[3]
0 = None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore;
4 = Bypass/Bypass Restore; 8 = Open/Close.
Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter
9 (1 + 8); To select all, enter #15.
Note: System messages are logged when any non-zero selection is made.
✱
91
ALARM AUDIO VERIFICATION
(AAV)/REMOTE PHONE CONTROL
[2]
0 = None
1 = AAV and remote phone control
2 = remote phone control only
4 = AAV only
Notes:
(1) In order to activate the remote phone access feature and defeat an
answering machine ensure that the correct ring detection count (“15”)
has been programmed in field
✻
95.
(2) Remote phone session will be terminated if a report must be sent.
(3) If an alarm will be reported to primary and secondary phone numbers,
AAV can only function via the secondary number.
(4) If an alarm will be reported to a pager (6-8 in field
✻
49), or the follow me
phone number (10-12 in field
✻
49), AAV cannot be used.
✱
92 NUMBER OF REPORTS IN ARMED
PERIOD
[0]
0 = 10 Alarm/Alarm Restore Reports;
1 = Unlimited (UL installations = 0)
DOWNLOAD INFORMATION (
✱
93,
✱
94,
✱
95)
✱
93 FLEXIBLE CALLBACK
[0]
0 = No flexible callback; 1 = Last digit flexible; 2 = Last 2 digits
flexible;
3 = Last 3 digits flexible
✱
94
DOWNLOAD PHONE NUMBER
Enter up to 20 digits, 0–9; #+11 for '
✻
'; #+12 for '#'; #+13 for a
pause. Do not fill unused spaces. If fewer than 20 digits entered,
pressing
✻
advances to the next field. To clear entries from field,
press
✻
94
✻
.
Note: In UL installations, downloading may only be performed if a technician
is at the site.
✱95
RING DETECT COUNT FOR
DOWNLOADING/REMOTE PHONE
CONTROL MODE
[15]
0 = Disable Station Initiated Download; 1–14 = number of
rings (1–9, [#]+10 =10, [#] +11 =11, [#] +12 =12, [#] +13
=13, [#] +14 =14); 15 = answering machine defeat ([#] +15
=15)
✱96
INITIALIZE DOWNLOAD ID &
SUBSCRIBER ACCOUNT
No entry required
✱97
SET ALL PROGRAM FIELDS TO
1 OF 4 SETS OF DEFAULT VALUES
Enter 1-4 to select from default tables 1-4
Enter 0 to abort.
✱98
EXITS PROGRAMMING MODE
(PREVENTS RE-ENTRY)
If ✻98 is used to exit programming mode, you cannot enter the
Installer Code + 8+ 0 + 0 for re-entry. You must press "✻" and
"#" within 50 seconds of power up or from exiting Programming
mode to re-enter Programming mode.
Note: After exiting Program mode, the system takes up to 1
minute to reset. To bypass the reset delay, press [#] + [0].
(147 stránky)
(76 stránky)
(24 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce