ADEMCO Vista-128B PLUS Specifikace stáhnout pdf (Strana 72)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

5-12

FIELD

TITLE and DATA ENTRIES EXPLANATION

1*74

Relay Timeout XXX Minutes

Enter

000-127

times 2 minutes (000-254).

This is used for #80 Menu Mode Time-Driven event relay command

numbers “04/09” and

Output Programming

in the

#93 Menu Mode

Programming

output command “56.”

1*75

Relay Timeout YYY Seconds

Enter

000-127

seconds.

This is used for #80 Menu Mode Time-Driven event relay command

numbers “05/10” and

Output Programming

in the

#93 Menu Mode

Programming

command “57.”

1*76

Access Control Relay (partition-

specific)

01-96

= relay number

= relay not used.

If enabled, the assigned relay closes for 2 seconds when the user enters

his code and presses 0.

Must be

for UL installations.

NOTE:

See

SECTION 3: Installing the Control

for enhanced access

control capabilities.

2*00

Number of Partitions

Enter

1-8

Enter the number of partitions used in the system.

2*01

Daylight Saving Time Start/End

Month

= disable

= enable

Enter the months (

00-12)

in which daylight saving time starts and ends.

Enter

00, 00

if daylight saving time does not apply to the user’s region.

Standard setting for U.S. is 04,10.

2*02

Daylight Saving Time Start/End

Weekend

= disable

= enable

Enter the start and end weekends for daylight saving time as follows:

1=first; 2=second; 3=third; 4=fourth; 5=last; 6=next to last; 7=third from

last. Standard setting for U.S. is 1,5.

Fields 2*05 – 2*08 must be set to 0 for UL installations.

2*05

Auto-Arm Delay (partition-

specific)

= no delay.

01-14

times 4 minutes (04-56) delay.

= no auto arming.

This is the time between the end of the arming window and the start of

auto-arm warning time (field 2*06).

2*06

Auto-Arm Warning Period

(partition-specific)

01-15

times 1-minute warning.

= no warning period.

This is the time that the user is warned by a keypad sounding and display

to exit the premises prior to auto arming of the system.

2*07

Auto-Disarm Delay (partition-

specific)

= no delay.

01-14

times 4 minutes (04-56) delay.

= no auto disarming.

This is the time between the end of the disarming window and the start of

auto disarming of the system.

2*08

Force Arm Enable for Auto-Arm

(partition-specific)

= disable

= enable

If enabled, the system automatically bypasses any faulted zones when it

attempts to auto-arm.

If disabled, the system will not auto-arm.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 127 128

Komentáře k této Příručce

Žádné komentáře

ADEMCO Vista-128B PLUS Specifikace Strana 72

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu ADEMCO Vista-128B PLUS