ADEMCO Vista AT Uživatelská příručka stáhnout pdf (Strana 18)

– 18 –

Security Codes and Authority Levels

You can assign different security codes for use by other users.

Rules for

Assigning

Codes

• Only the System and Partition Masters can assign user codes to users and change user

partitions.

• User code programming involves these steps:

1. Choose a user number from the set of users assigned to the partition in which the user

will be operating, and assign a 4-digit security code.

2. Assign an authority level to that user.

3. Assign other attributes as necessary.

NOTE: The factory settings are designed to meet most normal user situations.

Therefore, the only step you usually need to do when adding users is to assign a user

number (from the partition’s pre-assigned user numbers) and a security code.

Authority Levels (define the system functions a particular user can/cannot perform)

Level Title Explanation

N/A System Master Reserved for user 02; Can perform all system functions and assign codes in

(default = 1234) all partitions; can change its own code as follows:

Master code + [8] + 02 + new master code + new master code again

0 Standard User: Can only perform security functions in assigned partition. Cannot perform

other system functions

1 Arm Only: Can only arm the system. Cannot disarm or do other functions.

2 Guest: Can arm the system in assigned partitions, but cannot disarm the system

unless the system was armed with this code. This code is typically assigned

to someone (e.g., babysitter or cleaner) who has a need to arm/disarm the

system only at certain times. The user of this code should not use the “Quick

Arming” feature.

3 Duress Code: Intended for use when you are forced to disarm or arm the system under

threat. When used, the system will act normally, but can silently notify the

Central Monitoring Station of your situation, if that service has been

provided.

4 Partition Master Can do everything a standard user can do, and can assign user codes to users

in their partition and can change its own code as follows:

Partition master code + [8] + user number + new master code + new

master code again

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Žádné komentáře

ADEMCO Vista AT Uživatelská příručka Strana 18