ADEMCO Alpha Vista Console Manuál s instrukcemi stáhnout pdf (Strana 42)

For the eight event reporting

channels (digits 5-12 in the format), the channel

status codes are as follows:

Code

Meaning

NEW EVENT (previously unreported)

OPENING REPORT

RESTORE

CLOSING REPORT

5 NORMAL (no event since previously reported RESTORE)

PREVIOUSLY REPORTED EVENT STILL PRESENT

For the ninth channel (digit 13),

the following channel status codes are used:

DURESS REPORT in channel 1 and ZONE ALARM and ALARM RESTORES assigned

to CHANNELS 9 through 15 (in Addresses *61 through *64) will appear in

channels 2 through 7 respectively. Channel 8 is not usable.

2 OPENING REPORT in the previous 7 or 8 channels; 7 if expanded

opening/closing reporting is selected,

wherein User ID (1-9,A-F)

appears in Channel 1.

BYPASS and BYPASS RESTORE REPORTS for ZONES assigned to CHANNELS 1

through 8 (in Addresses

*61 through *64) will appear in Channels 1

through 8.

4 CLOSING REPORT in the previous 7 or 8 channels; 7 if expanded

opening/closing reporting is selected,

wherein User ID (1-93A-F)

appears in Channel 1.

ZONE TROUBLE and TROUBLE RESTORE REPORTS for ZONES assigned to

CHANNELS 1 through 8 (in Addresses

*6I through *64) will appear in

channels 1 through 8.

6 SYSTEM TROUBLE and TROUBLE RESTORE REPORTS are in the previous 8

channels; wherein:

CHl= Loss of AC

CH5=

Not Applicable

CH2.

Low Battery

(3+6=

Not Applicable

(333.

Program Tamper*

CH7.

Not Applicable

CH4.

Power On Reset*

CH8=

Not Applicable

*No Restore report is provided for these conditions.

ZONE ALARM and ALARM RESTORE REPORTS for ZONES assigned to CHANNELS 1

through 8 (in Addresses

*61 through *64) will appear in channels 1

through 8.

TEST REPORT. All ‘5’s will appear in channels 1 through 8.

IMPORTANT NOTES:

1. When the traditional Ademco High Speed format is used, zones assigned to

channels 9 through 15 in Addresses

*61 through *64 cannot report trouble,

trouble restore,

panic zones are

(e.g.

* & #, 1 &

2. Only NEW events:

channel or TEST

will report.

bypass, and bypass restore.

AS such,

24 hour type keypad

good candidates for the use of these reporting channels

*, 3 & # panics, etc.)

ALARM, OPENING, RESTORE, BYPASS, CLOSING or TROUBLE on any

will trigger

transmission, at which time all 9 channels

3. When the traditional Ademco High Speed format is used, non–zero codes must

be entered in Addresses 61, 62, 63, 64 (for zones in use), 65, 66, 67 and

68.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Komentáře k této Příručce

Žádné komentáře

ADEMCO Alpha Vista Console Manuál s instrukcemi Strana 42

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu ADEMCO Alpha Vista Console