ADEMCO VISTA-128B Průvodce nastavením Strana 216

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 252
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 215
VISTA-128B Installation Instructions
28-6
Multi-Access ?
0 = NO , 1 = YES
Press 0 (NO) if the user is to have access to this partition only.
Press 1 (YES) if the user is to have access to more than one
partition. If NO, the program exits this mode. If YES, the
keypad prompts for the Global Arm option for this user.
Global Arm ?
0 = NO , 1 = YES
Press
0
(NO) or
1
(YES), depending on whether this user will be
allowed to arm more than one partition via Global Arm
prompts (described in the
Keypad Functions
section) .
The keypad now prompts for the user’s access to the next
partition.
Part. 2 – SHOP ?
0 = NO , 1 = YES
Press
0
(NO) or
1
(YES), depending on whether this user will
have access to the displayed partition number. If NO, the
keypad displays this prompt for the next partition number in
sequence.
If YES, the keypad prompts for the following:
User’s authority level in the displayed partition (see
Authority Level prompt above).
Open/Close option for this user in the displayed partition
(see Open/Close prompt above).
Global Arm option for this user in the displayed partition.
When all partitions have been displayed, the keypad will scroll
through all partitions to which access has been assigned, and
will display the user number, authority level, open/close and
global arm options that were programmed for each partition to
which the user was granted access. For example:
Part. 1 A0
*
WHSE
User 003 Auth=3G.
Note that the “G” following the authority level indicates that
the global arm feature is enabled for this user in the displayed
partition, and that the period at the end of the second line
indicates Open/Close reporting is enabled for this user in the
displayed partition. The "
" indicates the partition from which
the user may be changed or deleted.
To CHANGE a Master, Manager, or Operator Code
Enter
[Installer code]* + 8 + [User number (002-150)] + [new user's code]
* Or Master or Manager code, but must be code with higher level of authority than the code
being changed (i. e., Master Code can change a Manager or Operator-level Code, but cannot
change another Master Code; a Manager Code can change an Operator-level Code, but
cannot change a Master or another Manager Code).
User Number = 003
NEW USER?
The system detects that the user number is already assigned,
and will prompt if this is a new user.
Press
0
(NO).
The system will then confirm that the change is allowed based
on authorization level.
Zobrazit stránku 215
1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 251 252

Komentáře k této Příručce

Žádné komentáře