ADEMCO 4140XMPT2 Uživatelský manuál stáhnout pdf (Strana 97)

– 97 –

Basic Scheduling Menu

Structure

To enter scheduling

program mode, enter the

installer code + # + 80.

Once the worksheets are completed, you can begin to program the scheduling

features. There are 5 sets of scheduling menus as shown below. Entering "1" at a

displayed main menu prompt will select that menu set. Prompts for programming

that scheduling feature will then appear. Enter "0" to skip a menu screen and

display the next menu.

Time Window ?

1 Yes 0 = No 0

Upon entering Schedule Menu Mode, this prompt will

appear. Enter 1 to program time windows. Refer to the

Programming Time Windows section for detailed

procedures. Enter 0 to move to the Open/Close

Schedules prompt.

O/C Schedules ?

1 Yes 0 = No 0

Enter 1 to program opening and closing schedules.

Refer to the Programming Open/Close Schedules

section for detailed procedures. Enter 0 to move to the

Holidays prompt.

Holidays ?

1 Yes 0 = No 0

Enter 1 to program holiday schedules. Refer to the

Holiday Programming section for detailed procedures.

Enter 0 to move to the Timed Events prompt.

Timed Events ?

1 Yes 0 = No 0

Enter 1 to program timed events using relay outputs or X-

10 devices. Refer to the Programming Timed Events

section for detailed procedures. Enter 0 to move to the

Access Schedule prompt.

Access Sched. ?

1 Yes 0 = No 0

Enter 1 to program access schedules. Refer to the

Programming Access Schedules section for detailed

procedures. Enter 0 to move to the Quit prompt.

Quit ?

1 Yes 0 = No 0

Enter 1 to quit #80 Scheduling Menu Mode and return to

normal operating mode. Enter 0 to make any changes or

review the scheduling programming options. If 0 is

pressed, the TIME WINDOW menus are displayed.

Programming Time

Windows

Enter Scheduling Mode by entering the installer code + # + 80. The console will

display the Time Window programming prompt.

Time Window ?

1 Yes 0 = No 0

Enter 1 at this main menu prompt to program time

windows.

Time Window # ?

01-20, 00 = Quit 01

Enter the 2-digit time window number to be

programmed. Press * to accept the entry.

Enter 00 then * at the "TIME WINDOW #" prompt to quit

Time Window programming and display the Quit ?

prompt.

Enter 0 at the Quit ? prompt to

return to the main menu choices

and continue programming. Enter

1 to quit Scheduling Menu Mode.

Quit ?

1 = YES 0 = NO 0

01 TIME WINDOW

00:00AM 00:00AM

If a time window number was entered, the cursor will be

positioned on the tens of hours digit of the start of

window entry. Enter the desired start of window hour and

press *. The cursor moves to the minutes. Enter the

desired minutes and press *. Toggle the AM/PM

indication by pressing any key 0-9 while the cursor is

under the letter A/P position. Repeat for the end of

window time entry .

When the entry is completed, the "TIME WINDOW #"

prompt is displayed again. Enter the next time window

number to be programmed and repeat the procedure.

Note: If a time window is not used, enter 00:00AM for the

start and stop times.

When all time windows have been programmed, enter 00 at the TIME WINDOW #

prompt to quit Time Window menus.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 131 132

Komentáře k této Příručce

Žádné komentáře

ADEMCO 4140XMPT2 Uživatelský manuál Strana 97

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu ADEMCO 4140XMPT2