ADEMCO Security System VISTA-15CN Průvodce nastavením stáhnout pdf (Strana 66)

VISTA-15/VISTA-15CN Installation and Setup Guide

15–4

✱

36 ENTRY DELAY 2

0 = 30-second delay 4 = 120-second delay

1 = 45-second delay 5 = 180-second delay

2 = 60-second delay 6 = 240-second delay

3 = 90-second delay

The system waits the time entered before it sounds an alarm upon entering.

UL installations: Must be set for a maximum of 45 seconds

✱

37 AUDIBLE EXIT WARNING

0 = no exit warning sound

1 = provide exit warning sound when armed AWAY or MAXIMUM

Warning sound consists of slow continuous beeps until last 10 seconds, when

it changes to fast beeps. The warning sound ends at the termination of Exit

time.

✱

38 CONFIRMATION OF ARMING DING

0 = no ding

1 = confirmation ding after arming system

2 = confirmation ding after arming from RF button or RF keypad only (ding

occurs when the system receives the RF transmission)

Confirmation of arming is ½-second external sounder “ding” when closing

report is sent, or at the end of Exit Delay.

✱

39 POWER UP IN PREVIOUS STATE

0 = always power up in a disarmed state

1 = assume the system status prior to power-down

When the system powers up armed, an alarm occurs 1 minute after arming if

a zone is faulted.

Note that if the previous state was armed AWAY, STAY, NIGHT-STAY,

INSTANT, or MAXIMUM, the system does not respond to sensor changes for

1 minute, which allows time for sensors such as PIRs to stabilize.

UL installations: Must be 1 (power up in previous state).

DIALER

PROGRAMMING

(

✱

40–

✱

52)

✱

40 PABX ACCESS CODE

(See box at left)

| | | | |

Enter up to 6 digits if PABX is needed to access an outside line. If fewer than

6 digits need to be entered, exit by pressing [

✱

]

and next field number

(e.g.,41). To clear entries from field, press

✱

41 PRIMARY PHONE NO.

(See box at left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing

[

✱

]

and next field number (e.g., 42). To clear entries from field, press

✱

NOTE:

Backup reporting (in which 8 calls are made to the secondary phone

number if no kissoff is received after 8 attempts to the primary number) is

automatic only if there is a secondary phone number (field

✱

42).

Fields

✱

40,

✱

41,

✱

42:

Enter up to the number

of digits shown. Do not

fill unused spaces.

Enter 0–9,

# + 11 for ✱

# + 12 for #

# + 13 for a pause

(2 seconds)

✱

42 SECONDARY PHONE NO.

(See box at left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing

[

✱

]

and next field number (e.g., 43). To clear entries from field, press

✱

See backup reporting note for field

✱

41. If using the pager feature, enter the

pager phone number here.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 131 132

Komentáře k této Příručce

Žádné komentáře

ADEMCO Security System VISTA-15CN Průvodce nastavením Strana 66

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu ADEMCO Security System VISTA-15CN